We will apply the decorative stones to the Piks Stone and our surfaces should be stable and smooth. If it is a painted wall, you should dig the paint partly with the help of a spatula, so that your adhesive will maintain its full grip on the wall.
If your wall is a sun-exposed wall, you should pre-wet your wall with a sponge to make the adhesive better set. Otherwise, the powder glue will dry up and lose its original strength.
BONDING
When preparing the powder adhesives, we slowly stir the powder adhesive into the water filled container and mix it up to the consistency. In other words, we put water on the powder adhesive and do not mix it. Conversely, we add powder adhesive inside the water so that there is no lumps and the adhesive gets homogeneous consistency.
The consistency of our adhesive should not be too watery. In light colored stones you should definitely choose white powder adhesives.
APPLICATION
We have prepared our powder glue with the help of a combed trowel.Ve Piks Stone Behind the decorative stone with the help of a sticky trowel with the help of a sticky trowel to let the adhesive to the stone population.
CUT
Where you need to cut Piks stone decorative stones with a hand grinding machine (marble cutting disc) you can cut.